S&S Cycle 100" Power Package Engine Performance Kit

Highlights

• Made in the USA.
• S&S 4.000" Big-Bore Cylinders, Piston Kits, S&S 585 Easy Start Cams, S&S Quickee Pushrods, TC3 Cam Support Plate, TC3 Oil Pump, and Precision Hydraulic Tappets are included in this kit.
• S&S Cylinder.
• 2x S&S 4.000" bore cylinders.
• Low friction ductile cast iron liner.
• Bolt in.
• No maching, balancing, or splitting the crankcase.
• Can be used with stock heads.
• Increase displacement from 88 ci to 100 ci.
• Piston Kit.
• 2x 4.000" pistons for front and rear.
• 2x 0.927" piston pins.
• 4x Piston pin clips with installation tool.
• 2x Ring packs which includes the top, second, oil rail and expander rings.
• Provides 10.5:1 compression ratio.
• S&S 585 Easy Start Cam Specifications.
• Intake: Open 20 / Close 45 / Duration at 0.053" 245 / Valve Lift 0.585".
• Exhaust: Open 60 / Close 20 / Duration at 0.053" 260 / Valve Lift 0.585".
• S&S Quickee Pushrods.
• Adjustable with chrome tubes.
• TC3 Cam Support Plate and TC3 Oil Pump.
• Machined from aluminum forgings.
• Ensures consistent oil pressure and engine longevity.
• Precision Hydraulic Tappets.
• Close tolerances for low leak down rates.
• Reduced valve train noise from start to shut down.
• Not for '06 Dyna.
• Not compatible with S&S 79 cc Super Stock heads.
• Not recommended for Tri-Glide or other three wheel models due to lugging nature of these bikes.
• '99-'04 Twin Cams will require the additional purchase of valve spring kit (sold separately).
• Chrome Pushrod Tubes.