FEULING PARTS Camchest - Race Series - Reaper 538 - Center/Water Cooled - M8

Highlights

• Billet 7075 aluminum oil pump, which is 50% harder and stronger than the factory pump, holding tighter tolerances under temperature.
• Short travel hydraulic lifters have 0.115" of total travel and will increase rpm by decreasing valve float and valve-train harmonics while maintaining a quiet engine.
• Deeper scavenge kidney ports over the HP+ series for even more scavenge flow volume.
• 30% more pressure gear volume over stock for M-Eight Twin-Cooled motors.
• 53% more scavenge gear volume over stock for M-Eight Twin-Cooled motors.
• 27% more pressure and scavenge gear volume over stock for M-Eight Oil-Cooled motors.
• 42% more scavenge volume with port sizing, matched passages and holes to the engine case for M-Eight Twin-Cooled motors and M-Eight Oil-Cooled motors.
• 68% more oil volume to the crankshaft and connecting rod bearing for M-Eight Twin-Cooled motors and M-Eight Oil-Cooled motors.
• 15-25 cooler engine temperatures for M-Eight Twin-Cooled motors and M-Eight Oil-Cooled motors.
• 15-30 cooler oil temperatures for M-Eight Twin-Cooled motors and M-Eight Oil-Cooled motors.
• 10-30 more psi of oil pressure for M-Eight Twin-Cooled motors and M-Eight Oil-Cooled motors.
• Increases oil pressure, scavenge volume and engine oil flow.
• Reduces wet sumping, blowby and oily air cleaners.
• Magnets in oil pump to help protect gears and pressure relief valve.
• Test results show 2 hp gain and 2 ft/lb of TQ gain to the rear wheel on M-Eight.
• Feuling test results show a 50% reduction of engine sump oil level.
• Kit includes: Race Series high volume oil pump, High Flow billet camplate, Reaper Series camshaft, Race Series short hydraulic roller lifters, one piece pushrods, Timken/ Koyo cam bearings, rocker arm studs/ nuts, gaskets, O-rings, ARP cam/ crank fasteners, washers, moly paste and Loctite.
• Made in the USA.
• Not for '23-'26 models with 121" VVT motor.
• /.
• Requires high-lift/high-load valve springs.
• Requires high lift valve springs.
• Includes:.
• Race Series High Volume Oil Pump.
• High Flow Billet Camplate.
• Reaper Series 538 Camshaft.
• Race Series Short Travel Lifters.
• One Piece Pushrods.
• Timken/Koyo Cam Bearing.
• Rocker Arm Studs and Nuts.
• Gaskets.
• O-Rings.
• ARP Cam/Crank Fasteners.
• Washers.
• Moly Lube.
• Loctite.