FEULING PARTS Camchest Kit - 487 - Chain Drive - Water Cooled - Race Series Lifters - M8

Highlights

• 487 Reaper Chain Drive Camshaft, Cam Installation Kit, One Piece Pushrod, Race Series Oil Pump, High Flow Camplate, and ARP Rocker Studs and Nuts, Camplate/Oil Pump Fasteners are included in this kit.
• 487 Reaper Camshaft.
• Bolt-in.
• Chain Drive.
• Camshaft for 114" and 117" engine.
• Responds very well to increased bore and or compression.
• Maintains bottom end power and pulls hard above 2,950 rpm when compared to stock.
• RPM range 2,250 - 6,100.
• Cam specs measured in the engine on the lifter @ 0.050 using a 1.61 rocker arm ratio.
• Cam Installation Kit.
• Includes cam bearing, cam/crank hardware and gasket/O-ring kit.
• Race Series Full-Travel Lifters.
• Hydraulic roller lifters, standard OD (0.8420-0.8423).
• Hydraulic lifters have a full.200 of total travel designed with a slower bleed down rate to handle heavy valve spring pressures.
• One Piece Pushrods.
• Heavy duty 7/16 diameter tube with 0.165 wall thickness, precision concentricity, heat treated with a black oxide finish.
• Race Series Oil Pump.
• Increase oil pressure, scavenge volume and engine oil flow.
• 30% more pressure gear volume over stock.
• 53% more scavenge gear volume over stock.
• 42% more scavenge volume with port sizing, matched passages and holes to the engine case.
• 46% more oil volume to the crankshaft and connecting rod bearing.
• 15- 25 cooler engine temperatures.
• 15- 30 cooler oil temperatures.
• 10-30 more PSI of oil pressure.
• Reduces wet sumping, blow by and oily air cleaners.
• Magnets in oil pump to help protect gears and pressure relief valve.
• Rear wheel power gains of 2 horsepower and 2 ft. lb. of torque are achieved.
• FEULING test results show a 50% reduction of engine sump oil level.
• High Flow Camplate.
• Billet 7075 aluminum.
• Bolts into stock location.
• Made in the USA.
• Cam specs measured on the lifter @ 0.050" using a 1.61 rocker arm ratio. Feuling does not recommend tuning beyond stock emissions standards.
• Not for VVT water cooled engines.
• Kit Includes:.
• 487 Reaper Chain Drive Camshaft.
• Cam Installation Kit.
• One Piece HP+ Pushrods.
• Race Series Oil Pump.
• High Flow Camplate.
• ARP Rocker Studs and Nuts.
• Camplate/Oil Pump Fasteners.