FEULING PARTS Camchest Kit - 487 - Chain Drive - Oil Cooled - Race Series Lifters - M8

Highlights

• 487 Reaper Chain Drive Camshaft, Cam Installation Kit, One Piece Pushrod, Race Series Oil Pump, High Flow Camplate, and ARP Rocker Studs and Nuts, Camplate/Oil Pump Fasteners are included in this kit.
• 487 Reaper Camshaft.
• Chain Drive.
• 38 overlap.
• RPM range 2,250 - 6,100.
• Engineered specifically as a bolt-in camshaft upgrade for factory 114" and 117" M8 engines.
• Responds very well to increased bore and or compression.
• Maintains bottom end power and pulls hard above 2,950 rpm when compared to stock.
• Cam specs measured in the engine on the lifter @ 0.050 using a 1.61 rocker arm ratio.
• Cam Installation Kit.
• Includes cam bearing, cam/crank hardware and gasket/O-ring kit.
• Full-travel hydraulic lifters made from machined steel designed with 0.200" of travel.
• One Piece Pushrod.
• HP+ heavy duty 7/16 diameter tube with 0.165 wall thickness, precision concentricity, heat treated with a black oxide finish.
• Race Series Oil Pump.
• High flow 2.250 Chrome Moly gerotor gears.
• 27% more pressure and scavenge gear volume over stock.
• 42% more scavenge volume with matched passages, port sizing and holes to the engine case.
• 46% more oil volume to the crankshaft and connecting rod bearing.
• 15- 25 cooler engine temperatures.
• 15- 30 cooler oil temperatures.
• 10-30 more PSI of oil pressure.
• Reduces wet sumping, blow by and oily air cleaners.
• Magnets to help protect gears and pressure relief valve.
• FEULING test results show a 50% reduction of engine sump oil level.
• High Flow Camplate.
• Rear wheel power gains of 2 horsepower and 2 ft. lb. of torque can be achieved.
• Made in the USA.
• Feuling does not recommend tuning beyond stock emissions standards.
• To install this kit on a stock 107" engine, you cannot use the included one-piece pushrods. You must purchase a separate set of Adjustable Pushrods to manually set the correct lifter preload for your 107" motor. Using the included one-piece pushrods on a 107" engine will cause catastrophic valvetrain damage.
• Not for M8 with VVT engine.
• Kit Includes:.
• 487 Reaper Camshaft.
• HP+ Pushrods.
• High Flow Camplate.
• Race Series Oil Pump.
• Cam Installation Kit.
• ARP Rocker Studs and Nuts.
• Camplate/Oil Pump Fasteners.