Caliper, Right, P4 34/38mm, without Pads, Billet Monobloc, 108mm Radial Mount, for use w/ Narrow Band Disc, Front, Nickel - XA3J7F1

Item Summary Right side caliper 34mm and 38mm pistons 4 piston caliper Central bridge for highest stiffness 2 individual pads / held without a spring Brake Fluid DOT 4 or 5.1 Hand-painted, red Brembo - Logo, a sign of Brembo Pure Racing Products About the Product Radial Monoblock Racing Caliper Right for 2 single brake pads Pinless MotoGP and WSB material Increased caliper body stiffness thanks to the triple bridge. Advanced geometries used in caliper body design. Brembo Pad Z 04: 07835424 Technical Specifications Position: Front Caliper Body: Monoblock Fixing: Radial Number of Pistons: 4 Piston Diameter: 34/38mm Disc Height: 30mm Material: Billet Aluminum Finishing: Nickle Bridges: 3 Hardware: Titanium Pistons: Titanium Weight (w/o pads): 640gr Pad Shape: Q Including Pads: No Offset: 22.5mm Brake Fluid: DOT4 Spare Parts Bleed Screw Cover Bleeding Screw Thermotapes 88-127 degrees Thermotapes 132-171 degrees Brake Pads Z03 Sintered Endurance: 07A02310 or 07A02320 Z04 Sintered: 07835424 Monoblock caliper, strictly racing, machined entirely from billet thanks to the use of numerically controlled equipment. The extremely low weight, just 640 grams without brake pads, and the use of titanium mounting bolting and pistons places this caliper at the absolute top of its class in performance in the Brembo range. The hydraulics were the focus of a careful fine-tuning and, thanks to the use of 4 pistons with 34 and 38 mm differentiated diameter, allow unparalleled braking power to be unleashed. The Brembo monoblock calipers made from billet are derived from Brembo's great experience in racing which, crossing over into each phase of the production process, has allowed the mass/stiffness ratio and braking performance to be increased. These calipers contribute to the highest performance possible with a bike caliper and are the result of precise design calculations, as well as the use of the most advanced metal machining technologies available. This model uses a special surface finish borrowed from MotoGP: The nickel plating allowed the calipers to be taken to new performance levels thanks to further restrictions on the machining tolerances. For this type of caliper we recommend the use of a "low strip" brake disc. This Component is designed and manufactured to be used exclusively in racing competitions and, therefore, the product shall be installed through specific adaptors not included in the packaging of the component and by highly qualified and competent professionals working in the "racing" field. Please contact our distributor for any further clarification. Position FRONT Caliper Body MONOBLOCK Pistons mm 34-38 Pistons Q. Ty 4 Disc height mm 30 Material Billet Aluminium Surface protection Nickel coating Piston material Titanium Weight w/o (gr) 640 Mounted pads included No Offset (mm) 22,5 Click here to view the complete 2012 Brembo Motorcycle Brakes catalog.