BMR Sway Bar Kits

The two primary functions of sway bars are to control body roll and to determine the understeer or oversteer behavior of a vehicle. Stock sway bars have low torsional spring rates because they are manufactured from small diameter bar stock or tubing. BMR's suspensions SB006 front sway bar was designed by factoring in the vehicle weight, application, motion ratio, coil spring rate, and adjustability requirements. Manufactured from heavy-duty, solid bar stock, the SB006 is cold formed to better resist torsional fatigue and retain its "memory" far longer than the hot-formed bars used by many competitors. The sway bar is CNC-formed for exact manufacturing tolerances and repeatable high quality. The sway bar mounts to the car using polyurethane bushings. These bushings are molded from 88-durometer, low-deflection, polyurethane, and are internally fluted to keeps grease in the bushing. The steel sway bar mounting brackets are reinforced to minimize deflection. BMR's suspension designed the SB006 sway bar for street performance, autocross, and road race applications. The SB006 front sway bar gives you a 99% increase in sway bar rate. These rate increases and adjustability allow you to fine-tune the handling characteristics of your B-body so you can drive harder through corners with minimal body roll. The SB006 attaches to your B-body with 88-durometer polyurethane bushings, reducing the deflection from the stock rubber bushings. This allows for more sway bar control, and more control equals better handling. When performance is a must, rely on BMR's suspension! BMR's suspensions SB006 sway bars are available in hammertone and red powdercoat for long-lasting good looks. Installation time is about 1-2 hours. Proudly made in the U. S. A.! Shipped complete with all required bushings and hardware. Sway Bar Kit With Bushings, Front, Solid, SS Design.